SHIDO /MULTI DC 1.0 & 4.0

SHIDO DUAL CHARGER DC 1.0 & DC 4.0

Lithium batteries offer an excellent level of performance. For the best results, they must be charged correctly. To accommodate this need in the market we developed our own Shido battery chargers, suited for motorcycle and powersport applications. SHIDO dual battery chargers come with a unique and optimized algorithm, which allows for a safe charge of both Lithium LiFePO4 and lead-acid batteries.

One of the key notices is that charging a deeply discharged lithium battery (less than 10V) should be done very gentle, starting with applying very low current. Applying high current from the start on discharged lithium batteries will cause premature failing. Also, chargers where the voltage goes above 15 volts for a certain period will severely damage your lithium battery.

SHIDO dual chargers will also be maintaining the charge on your batteries after the charging is completed. Every 4 hours, the charger will check the voltage. When battery voltage drops below 12,8 volt, the charger will start applying charge again. We can now recommend a charger for lithium and lead-acid batteries in all confidence.

Clear split between Lithium and lead-acid charging modes.
Upgraded algorithm for both Lithium and lead-acid modes.
Battery Recovery for deeply discharged batteries.
Battery health check after charging.
Maintaining mode, with 4 hour intervals voltage checks.
Protected against reverse polarity, overcharging, overcurrent, overheating and short-circuits.
User friendly detection for reverse polarity, low-voltage or damaged batteries.
IP 65, waterproof.
Adjusts for varying A/C line voltage and delivers consistent charging current.
EXTRA on the SHIDO DC 4.0:
Specific AGM mode for sealed batteries.
Superb digital screen with live voltage reading.
Hook attachment.
Suitable for 6V and 12V batteries.
Choose between 1A and 4A.